Screen Imagesetter FT-R 3050 with OLP LD-1060, HQ 310 RIP and Kodak Polychrome CMS Muxer Multi 1
Article number: 20520
Listed in category: Prepress / Computer To Film / Imagesetter > Screen Imagesetter FT-R 3050 with OLP LD-1060, HQ 310 RIP and Kodak Polychrome CMS Muxer Multi 1 from brakensiek.de
Screen image setter / Capstan Belichter FT-R in 3050 with LD-1060 OLP, HQ 310 RIP and Kodak polychrome multinational CMS Muxer 2
Exposure method Flachbettscannen with polygon mirror
Source of light solid-state laser (633 nm)
Resolution in 1000, in 1200, in 1500, in 1800, in 2400, in 3000 dpi
Exposure material film, paper, Mitsubishi Silver DigiPlate
Strength of the exposure material (1) paper <120 μm, Mitsubishi Silver DigiPlate <200 μm
Film and paper widths 14 "16" 18 "20" 22"
Widths Mitsubishi Silver DigiPlate 404 mm 404 mm, 508 mm, 550 mm
Issue length film / paper to the rallying cassette in the A mode 30.5 m.
Issue length film / paper to the rallying cassette
in the B mode
3.00 m
Issue length film / paper directly to a developing machine 1.20 m
Issue length film / paper to the lower collective box: 1.00 m, 1 curve
Issue length Silver DigiPlate to them
Rallying cassette in the A mode (2)
3.00 m
Issue length Silver DigiPlate to the lower collective box: 1.00 m, 1 curve
Maximum exposure width film / paper 508 m
Maximum exposure width SDP 490 m
Suitable material for A mode film, paper, Mitsubishi Silver Digiplate
Suitable material for B mode film
Buffer memory Standard-zeitgetakteter HDD buffer
Loading method for exposure material automatically
Interface SCSI-2
Electricity supply 100 V ~... 240 V ~, 0.6 kW
Ground earth opposition <100 Ω
Loss of heat 512 kcal
Case dimensions 790 (770) x 915 x 975 mm
Weight 190 kg
Surroundings temperature at company 18... 28 °C (optimally: 23 ± 2 °C)
Surroundings temperature with storage 0... 50 °C
Allowed air humidity 50... 70% (optimally: 55 ± 5%)
(1) With thick SDP pressure plates become SDPMagazin
and rallying box inevitably.
(2) To guarantee around a high exactness,
if the material had to go after every exposure
are cut and are spent.
(3) Figures in clips are valid for the models,
to a developing machine
are connected.
Not provided (optional accessories):
Paper magazine
SDP magazine
Rallying cassette SDP
Standard scope of supply:
Leadership records on the left and on the right for the paper magazine
Net cable
SCSI cable
Final plug SCSI
2 adaptor flanges
Standard magazine
Manual
General info to the series:
Product description
The Capstan-Belichter of the row FT-R are with
to a system with polygon mirror equipped,
with the panchromatic material (film, paper
and adaptable pressure plates) are exposed
is able.
They become about an external Software-RIP
(Grid image Processor) from the added one
Host computer from steered. The RIP conceives
digital data of another computer
in the net and calculates this in grid values
around. Then these grid values become successively
from two internal hard disks (380
Mb) of the Belichters for the in each case to be exposed one
Material processes.
Moreover, the possibility, all setting exists
for the exposure process by hand,
is called above an operating field directly in the Belichter
preincrease.
The exposure material automatically becomes of her
Material cassette taken, exposed, cut
and spent.
Two exposure kinds allow either
the quick length exposure or an exposure
from the highest passport exactness for the Mehrfarbdruck.
The models FT-R in 3035 AT and FT-R 3050 AT
give the exposed film / paper directly
a connected developing machine
from or film, paper and adaptable pressure plates
are escorted in to an internal collective box.
The models FT-R 3035 and FT-R 3050 advance
the exposed material in a rallying cassette.
The models FT-R 3035 and AT process
Film with a width from up to 406.4 mm (16").
The models FT-R 3050 and AT process
Film with a width from up to 558.8 mm (20").
The parametres for the film material are under
to a code stored. The input occurs
either above the operating field or by one
ID code on the magazine, that of a sensor
it is read.
Two exposure kinds allow either
the quick length exposure or an exposure
from the highest passport exactness for the Mehrfarbdruck.
The models FT-R in 3035 AT and FT-R 3050 AT
give the exposed film / paper directly
a connected developing machine
from or film, paper and adaptable pressure plates
are escorted in to an internal collective box.
The models FT-R 3035 and FT-R 3050 advance
the exposed material in a rallying cassette.
The models FT-R 3035 and AT process
Film with a width from up to 406.4 mm (16").
The models FT-R 3050 and AT process
Film with a width from up to 558.8 mm (20").
The parametres for the film material are under
to a code stored. The input occurs
either above the operating field or by one
ID code on the magazine, that of a sensor
it is read.
Left side and front
the Capstan-Belichter of the row FT-R
Product information
8 Capstan Belichter FT-R
Exposure kind put
Capstan-Belichter FT-R3035 and FTR3050
allow it to you, between two
To choose exposure kinds: A mode and BModus.
A mode stands for
* Endless exposure with the model with rallying cassette,
* Admission of long exposure materials
with the model with rallying cassette and
* Exposure with high speed.
B mode stands for the highest passport exactness
with the colour pressure 4, because the exposure material
before the exposure is made free of tension.
With the paper magazine you are able only in
A mode expose.
The rallying cassette takes in the A mode 30.5 m
on, in the mode B she takes in FT-R3050 only
3 m on and with FT-R3035 only 2.5 m.
In the B mode it comes on the highest passport exactness
in, therefore, lasts to the case and Entladevorgang
longer.
Between A mode and B mode you are able
only change, if no exposure material
is loaded or directly after the reaping.
In the following table you receive one
Overview about the suitable ones
Suitable exposure kind choose
To achieve a good result with the exposure,
have to do the exposure kind on the exposure material
be voted. Every material
if his Steifigkeit own to him or emulsion strength have.
If a material with a wrong exposure kind
it is exposed, the desired one is able
Quality of the exposure are not reached.
Use the suitable exposure kind for her
Exposure material. The accompanying table
gives an overview.
Exposure material exposure kind
Film A mode + B mode
Printing paper A mode
Adaptable pressure plates
Mitsubishi Silver Digi-
Plate
A mode
Exposure kinds in the overview
A mode B mode
Material entrance standard magazine suitably suitable
Paper magazine suitably not suitable
Material exit
Rallying cassette suitable
maximum 30.5 m
suitably
maximum 3.0 m of FT-R3050
maximum 2.5 m of FT-R3035
Developing machine suitable
maximum 1.2 m
suitably
maximum 1.2 m
lower collective box suitable
maximum 1 m
suitably
maximum 1 m
Exposure method Flachbettscannen with polygon mirror
Source of light solid-state laser (633 nm)
Resolution in 1000, in 1200, in 1500, in 1800, in 2400, in 3000 dpi
Exposure material film, paper, Mitsubishi Silver DigiPlate
Strength of the exposure material (1) paper <120 μm, Mitsubishi Silver DigiPlate <200 μm
Film and paper widths 14 "16" 18 "20" 22"
Widths Mitsubishi Silver DigiPlate 404 mm 404 mm, 508 mm, 550 mm
Issue length film / paper to the rallying cassette in the A mode 30.5 m.
Issue length film / paper to the rallying cassette
in the B mode
3.00 m
Issue length film / paper directly to a developing machine 1.20 m
Issue length film / paper to the lower collective box: 1.00 m, 1 curve
Issue length Silver DigiPlate to them
Rallying cassette in the A mode (2)
3.00 m
Issue length Silver DigiPlate to the lower collective box: 1.00 m, 1 curve
Maximum exposure width film / paper 508 m
Maximum exposure width SDP 490 m
Suitable material for A mode film, paper, Mitsubishi Silver Digiplate
Suitable material for B mode film
Buffer memory Standard-zeitgetakteter HDD buffer
Loading method for exposure material automatically
Interface SCSI-2
Electricity supply 100 V ~... 240 V ~, 0.6 kW
Ground earth opposition <100 Ω
Loss of heat 512 kcal
Case dimensions 790 (770) x 915 x 975 mm
Weight 190 kg
Surroundings temperature at company 18... 28 °C (optimally: 23 ± 2 °C)
Surroundings temperature with storage 0... 50 °C
Allowed air humidity 50... 70% (optimally: 55 ± 5%)
(1) With thick SDP pressure plates become SDPMagazin
and rallying box inevitably.
(2) To guarantee around a high exactness,
if the material had to go after every exposure
are cut and are spent.
(3) Figures in clips are valid for the models,
to a developing machine
are connected.
Not provided (optional accessories):
Paper magazine
SDP magazine
Rallying cassette SDP
Standard scope of supply:
Leadership records on the left and on the right for the paper magazine
Net cable
SCSI cable
Final plug SCSI
2 adaptor flanges
Standard magazine
Manual
General info to the series:
Product description
The Capstan-Belichter of the row FT-R are with
to a system with polygon mirror equipped,
with the panchromatic material (film, paper
and adaptable pressure plates) are exposed
is able.
They become about an external Software-RIP
(Grid image Processor) from the added one
Host computer from steered. The RIP conceives
digital data of another computer
in the net and calculates this in grid values
around. Then these grid values become successively
from two internal hard disks (380
Mb) of the Belichters for the in each case to be exposed one
Material processes.
Moreover, the possibility, all setting exists
for the exposure process by hand,
is called above an operating field directly in the Belichter
preincrease.
The exposure material automatically becomes of her
Material cassette taken, exposed, cut
and spent.
Two exposure kinds allow either
the quick length exposure or an exposure
from the highest passport exactness for the Mehrfarbdruck.
The models FT-R in 3035 AT and FT-R 3050 AT
give the exposed film / paper directly
a connected developing machine
from or film, paper and adaptable pressure plates
are escorted in to an internal collective box.
The models FT-R 3035 and FT-R 3050 advance
the exposed material in a rallying cassette.
The models FT-R 3035 and AT process
Film with a width from up to 406.4 mm (16").
The models FT-R 3050 and AT process
Film with a width from up to 558.8 mm (20").
The parametres for the film material are under
to a code stored. The input occurs
either above the operating field or by one
ID code on the magazine, that of a sensor
it is read.
Two exposure kinds allow either
the quick length exposure or an exposure
from the highest passport exactness for the Mehrfarbdruck.
The models FT-R in 3035 AT and FT-R 3050 AT
give the exposed film / paper directly
a connected developing machine
from or film, paper and adaptable pressure plates
are escorted in to an internal collective box.
The models FT-R 3035 and FT-R 3050 advance
the exposed material in a rallying cassette.
The models FT-R 3035 and AT process
Film with a width from up to 406.4 mm (16").
The models FT-R 3050 and AT process
Film with a width from up to 558.8 mm (20").
The parametres for the film material are under
to a code stored. The input occurs
either above the operating field or by one
ID code on the magazine, that of a sensor
it is read.
Left side and front
the Capstan-Belichter of the row FT-R
Product information
8 Capstan Belichter FT-R
Exposure kind put
Capstan-Belichter FT-R3035 and FTR3050
allow it to you, between two
To choose exposure kinds: A mode and BModus.
A mode stands for
* Endless exposure with the model with rallying cassette,
* Admission of long exposure materials
with the model with rallying cassette and
* Exposure with high speed.
B mode stands for the highest passport exactness
with the colour pressure 4, because the exposure material
before the exposure is made free of tension.
With the paper magazine you are able only in
A mode expose.
The rallying cassette takes in the A mode 30.5 m
on, in the mode B she takes in FT-R3050 only
3 m on and with FT-R3035 only 2.5 m.
In the B mode it comes on the highest passport exactness
in, therefore, lasts to the case and Entladevorgang
longer.
Between A mode and B mode you are able
only change, if no exposure material
is loaded or directly after the reaping.
In the following table you receive one
Overview about the suitable ones
Suitable exposure kind choose
To achieve a good result with the exposure,
have to do the exposure kind on the exposure material
be voted. Every material
if his Steifigkeit own to him or emulsion strength have.
If a material with a wrong exposure kind
it is exposed, the desired one is able
Quality of the exposure are not reached.
Use the suitable exposure kind for her
Exposure material. The accompanying table
gives an overview.
Exposure material exposure kind
Film A mode + B mode
Printing paper A mode
Adaptable pressure plates
Mitsubishi Silver Digi-
Plate
A mode
Exposure kinds in the overview
A mode B mode
Material entrance standard magazine suitably suitable
Paper magazine suitably not suitable
Material exit
Rallying cassette suitable
maximum 30.5 m
suitably
maximum 3.0 m of FT-R3050
maximum 2.5 m of FT-R3035
Developing machine suitable
maximum 1.2 m
suitably
maximum 1.2 m
lower collective box suitable
maximum 1 m
suitably
maximum 1 m
Contact:
Your contact person: Tim Brakensiek
purchase list
last update:
20.11.2012