Logo SilverFast Logo Logo rss
VCS50 VeriColor solo
Article number: 31642
Listed in category: Measurement / Remission-Densitometer > VCS50 VeriColor solo from brakensiek.de
VCS50 VeriColor ® solo

- Communication via RS232 Serial port and discrete
- 8-pin input and output
- Storage of up to 30 standards
- User-friendly software

Such a reliable and yet affordable tool for the Color can come only from the leading companies in the color science.

Consistently consistent color is an integral component of the overall quality of a product. This is especially true for industrial production environments of today: Here is an efficient system to reduce chromatic aberration of crucial importance. VeriColor ® Solo aufbewährter builds on technology from X-Rite ®. Suppliers of automotive components, and the coatings, plastics, textile and other industries around the world rely on this technology, when it comes to identify colors in their industrial assembly and sorting operations.

Take control of your colors with VeriColor ® Solo.

High spectral resolution for more precise Colour identification
VeriColor solo recognizes more detailed color information than any other industrial sensor system. A full-spectrum lighting system detects subtle color differences on various surfaces and can not be mislead by metamerism, ie situations in which different colors look under certain lighting conditions the same.

Non-contact measurement
VeriColor Solo is a non-contact measuring device when measuring different distances intermediate devices and objects as well as compensate for irregularities and bends can take into account the surface. Thanks to the contactless measurement method, the system is extremely flexible and practical. Therefore, it is ideal for use in extremely varied applications.

Unaffected by ambient light
With VeriColor solo work, you must not change the lighting and install any special sunscreen that protects the sensors of the system from ambient light. The system provides for all light conditions for precise, repeatable measurements.

Data storage for up to 30 active colors at once
VeriColor Solo can not only distinguish between thousands of colors, but also store information for up to 30 active colors at once. Hence, the Farbprogrammierung not be made again and again and users can check colors on an appropriate color palette of time.

Reliability in design and performance
VeriColor solo ensures a consistent level of performance without complex maintenance procedures and without constant readjustment. In order to prevent-the service should only Sen sorlinsen be kept clean.

Withstands harsh industrial conditions
VeriColor Solo is designed to heat, cold, to resist moisture, shock and contaminants, as they usually can occur in industrial environments.

Graphic tolerances
VeriColor solo offers an easily readable, clear graphical view of the findings. Tolerances that determine the applicability of color are represented graphically.

Optical color differences
VeriColor Solo offers intuitive color charts, which make possible a determination of color differences.

Log file access
VeriColor solo works with a log file that is designed to view and manage the measured data easily.

Standard actimetry
VeriColor Solo allows easy adjustment to the standard production after the initial setup. New measurements can be added at any time, hidden or deleted.

Easy setup
VeriColor Solo can be set up without any problem.

- Communication: RS232 and software-specific device.

- PLC interface: Basic requirements for the majority of the projects by specific inputs and outputs are provided, which simplifies programming considerably.

Alignment tool: This tool ensures the correct distance and angle of the sensor to the DUT.


Technical data

General

Types of instruments:
High-resolution, reflective color

Geometry:
0 ° / 30 ° or 30 ° / 0 ° (details below to 30 ° / 0 ° base)

Range:
12 mm

Difference in color resolution:
0.25 ÆLED, typical (ÆLED is an internal FarbunterschiedsBerechnung, based on the VeriColor LED color reaction and in the scaling of small color differences AEE * CIE is similar.)

Operating temperature:
00-50 ° C

Moisture level:
00-90% non-condensing

Umschließungsvorgabe:
Analog NEMA 4/IP56

Dimensions:
L: 13 cm, W: 7.4 cm, H: 3.3 cm

Weight:
347 g

Power supply:
24 V DC ± 10% at 250 mA max.

Performance

Black and reproducibility:
0.3 ÆLED 00-40 ° C1
(10 measurements to 3-second intervals on
1% reflective black)

White Reproducibility:
0.1 ÆLED 00-40 ° C 1
(10 measurements to 3-second intervals on
99% reflective white)

Measuring distance:
35 mm ± 5 mm

Measurement time:
250 ms

Time Clock:
1 sec (interval between measurement runs)

Warm up time:
30 sec typical at 23 ° C

Calibration:
Review recommended - 90 days / 0.5 million readouts
(Whichever comes first). More frequent inspections are necessary
required if the system does not suitably clean
is held.

Lifetime of LED lamp:
Life of the unit

Product life:
at least five years

Vibration:
5 to 10 Hz 0.200 "displacement peak - peak
10 -100 Hz at 1 G

Shock:
Serviceable at amplitudes of 15 g and a duration
18 ms
Inoperable g at amplitudes of 30 and
a duration of 11 ms

Environment

Use:
Only in enclosed spaces

Height:
to 2000 m

Air pollution:
Grade 2

Voltage:
Category II

Security target

Underwriters Laboratories UL 61010-1
Canadian Standards Assn. CSA 22.2 No. 1010.1-92
International Electrotechnical
Committee IEC (EN) 61010-1



Contact:
Your contact person: Tim Brakensiek
product request: VCS50 VeriColor solo

Ampel purchase list     last update:   20.11.2012
Topimage
worldprintmarket.com

Visit the new marketplace for prepress, press und postpress: www.worldprintmarket.com
Optimize your cash-flow by selling your no longer required machines.
Intellitrax

X-Rite IntelliTrax System - automatic spectral color measurement system for sheet, and roll-feed printing units and package-printing units according to PSO for Heidelberg, MAN Roland, KBA, Ryobi, Komori, Wifag, Mitsubishi. In at least 15 seconds you will measure the print control strip and receive a graphic printout of what to change in which zone to meet your deposited standard e.g. PSO.
matchflow adjust

With Matchflow-adjust you can share a pdf-document over the internet for detailed checking and annotation. In this document all project-members (depending on their access-rights) can acquire comments and modifications. By using the "Generated Print Report Button", you generate an new PDF which contains annotation number, username, date, annotation text and type. All comments are saved in a database. So the whole coordination-process is reconstructable at any time. You will save proof and dispatcher costs an maybe need only one final proof. We recommend to insert a flat PDF which can be written from any common workflow system. AGFA Apogee, Heidelberg Prinect, Creo Prinergy, Di Plot, if this function is enabled.
FireWire
SilverFast

Order your FR1SX Firewire-Adapter offer here.
A CD-ROM with actual SilverFast AI Studio + HDR Demo-Version is included in delivery. Please specify your scanner type. We are sure that only an perfect maintained Linotype Hell/Heidelberg Chromagraph S3300/S3400, Nexscan F4100/F4200, Primescan 7100, 8200, 8400 and Tango/Tango XL sowie Topaz HighEnd scanners provide quality and are able to reach Delta E 1 scales after reprofiling. Therefore we provide spare parts and preventive service. Service contracts are possible. After service we peform an new DIN VDE 701 report.
PDF

Dowload and print this article as PDF data sheet: Data Sheet VCS50 VeriColor solo
Terms and conditions:
Please only contact us via our registration form and only if you are a business person yourself. Every offer is subject to prior sale and includes your acceptance to our terms & conditions Terms and conditions (AGB) All logos and trademarks on this site are the property of their respective owners.

You will always receive an invoice including tax, which can be paid via wire transfer, in advance or cash. If you register on paypal, you may also pay by charging your paypal account with your credit card. If you are an EU member and you have a validated tax number which can be validated here: VIES VAT number validation / MwSt.-Informationsaustauschsystem MIAS) Validierung der MWSt.-Nummer then you pay tax-free. If you are from outside the EU, you can only pay tax-free, if the export is done with the transport company, called 'Schenker'. If you are not using 'Schenker', we cannot guarantee that we will get the export confirmation in time. In that case, you have to pay tax and you get it.

The website was generated by matchflow and the PDF version was released by matchflow-adust: communicate, control, confirm. Matchflow-adjust provides browser-based PDF correction and PDF annotation with web2print features.
Login | Subscribe to Newsletter | Imprint | Terms and Conditions | Contact | Links | Remote Control Win Mac| Stocklist | Purchase List |