Densitometer Gretag D185 47 B P
Article number: 34252
Listed in category: Measurement / Automatic Chart Scanning > Densitometer Gretag D185 47 B P from brakensiek.de
Gretag densitometer D185/47B/P
Non-new
Specifications
Display: Digital LCD
Measurement geometry 0 ° / 45 ° - ring optics
Light Source: Si photodiode
Colour Filter - Filter Set 47B - DIN 16536
- Filter Set 47 - ANSI Status T
- Interference Filters - DIN 16536
- Visual - V (lambda), CIE / ANSI PH 2:18
Measuring range: 0.00d - 2.50D (0.00d-2.20D, Yellow NB)
0% - 100%
Repeatability: + / - 0.01 D
+ / - 1% (for 10% -100% coverage)
Linearity: + / - 0.01 D, respectively. + / - 1%
Manufacturing tolerance: + / - 0.002D, respectively. + / - 2%
Orifice diameter: 3.6 mm
Balance: - Slope for Density measurement
- Zero point automatically
Polarizing filters: linear 2x (tube P)
Warm-up: no
Power supply: battery, nom. 7.2V, 600mA
Charging time: about 14h
Charging state: auto. Control and display
Measurements per charge: about 4000
Measuring time: 0.8 s
Data interface: RS232, unipolar, 5V TTL level
Baud Rate: 1200 bps
Parity: none
Format: 1 start bit, 8 data bits, 1 stop bit
Data transmission in ASCII format
Remote operation of the densitometer by a remote computer
Weight: about 850g
Dimensions: 7.9 x 7, 6x22cm
Accessories: calibration card charger, manual
The certification has expired, the batteries must be replaced. The device is no longer manufactured by Gretag. Purpose: spare parts inventory. The above text is taken from the handbook.
Non-new
Specifications
Display: Digital LCD
Measurement geometry 0 ° / 45 ° - ring optics
Light Source: Si photodiode
Colour Filter - Filter Set 47B - DIN 16536
- Filter Set 47 - ANSI Status T
- Interference Filters - DIN 16536
- Visual - V (lambda), CIE / ANSI PH 2:18
Measuring range: 0.00d - 2.50D (0.00d-2.20D, Yellow NB)
0% - 100%
Repeatability: + / - 0.01 D
+ / - 1% (for 10% -100% coverage)
Linearity: + / - 0.01 D, respectively. + / - 1%
Manufacturing tolerance: + / - 0.002D, respectively. + / - 2%
Orifice diameter: 3.6 mm
Balance: - Slope for Density measurement
- Zero point automatically
Polarizing filters: linear 2x (tube P)
Warm-up: no
Power supply: battery, nom. 7.2V, 600mA
Charging time: about 14h
Charging state: auto. Control and display
Measurements per charge: about 4000
Measuring time: 0.8 s
Data interface: RS232, unipolar, 5V TTL level
Baud Rate: 1200 bps
Parity: none
Format: 1 start bit, 8 data bits, 1 stop bit
Data transmission in ASCII format
Remote operation of the densitometer by a remote computer
Weight: about 850g
Dimensions: 7.9 x 7, 6x22cm
Accessories: calibration card charger, manual
The certification has expired, the batteries must be replaced. The device is no longer manufactured by Gretag. Purpose: spare parts inventory. The above text is taken from the handbook.
gebrauchtprodukt
last update:
21.11.2012