BUS-1 detector group module 1-MGMV
Article number: 43874
Listed in category: IT Systems / VDS Alarmsystems with iPhone App > BUS-1 detector group module 1-MGMV from brakensiek.de
BUS-1 detector group module 1-MGMV
VdS-Class C (G 108018)
suitable for intruder alarm systems in accordance with DIN EN 50131-1
Different detectors and connection
modules and BUS-distributors can be
attached to the BUS-type hold-up and
intruder alarm system as BUS-subscribers
via a 3-strand "BUS-1" detector bus.
Increased user comfort and a higher
level of safety is ensured by the
selective control and evaluation of the
detectors. Ease of installation makes
this technology very time and cost
effective. The single BUS-1 subscribers
have a 6x programming switch to set the
subscriber addresses between 1 and 63.
In case of VdS systems, please observe
that the detector bus subscribers can
only be assigned one secure area for
each BUS connection line.
1 detector group module to connect
conventional detectors to the BUS-1 with
additional integrated distributor.
- 1 deletable detector group (i.e. can
be reset) to connect max. 20 contact
switches or glass-break detectors
- 1 assigned BUS address
- Distributor with 8 soldering lugs
- Plastic housing for surface mounting
- Environmental class compliant with
VdS 2110 class II
- Operating temperature range 0 °C to
+50 °C
- Protection type IP 40
- Housing made of ABS synthetic
material
- Dimensions (W x H x D) 75 x 115 x 27
mm
- Supply voltage range 10 - 15 V DC
- RAL 9016 traffic white
- Standby power consumption approx. 4
mA
VdS-Class C (G 108018)
suitable for intruder alarm systems in accordance with DIN EN 50131-1
Different detectors and connection
modules and BUS-distributors can be
attached to the BUS-type hold-up and
intruder alarm system as BUS-subscribers
via a 3-strand "BUS-1" detector bus.
Increased user comfort and a higher
level of safety is ensured by the
selective control and evaluation of the
detectors. Ease of installation makes
this technology very time and cost
effective. The single BUS-1 subscribers
have a 6x programming switch to set the
subscriber addresses between 1 and 63.
In case of VdS systems, please observe
that the detector bus subscribers can
only be assigned one secure area for
each BUS connection line.
1 detector group module to connect
conventional detectors to the BUS-1 with
additional integrated distributor.
- 1 deletable detector group (i.e. can
be reset) to connect max. 20 contact
switches or glass-break detectors
- 1 assigned BUS address
- Distributor with 8 soldering lugs
- Plastic housing for surface mounting
- Environmental class compliant with
VdS 2110 class II
- Operating temperature range 0 °C to
+50 °C
- Protection type IP 40
- Housing made of ABS synthetic
material
- Dimensions (W x H x D) 75 x 115 x 27
mm
- Supply voltage range 10 - 15 V DC
- RAL 9016 traffic white
- Standby power consumption approx. 4
mA
gebrauchtprodukt
last update:
21.11.2012